Users Guide

Parameter Description Range Default
send traffic for the two controller
radios on different links. Recom-
mended value for this parameter
is <LMS-IP_addr>+1.
NOTE: This parameter is
deprecated in ArubaOS 6.4.2.0.
heartbeat-dscp
Define the DSCP value of AP
heartbeats.
Use this feature to prioritize AP
heartbeats and prevent the AP
from losing connectivity with
the controller over high-latency
or
low-bandwidth WAN
connections.
0-63 0
heartbeat-in <secs>
Set the interval between heart-
beat messages between a
remote or campus AP and its
associated controller. An
increase in the heartbeat interval
increases the time it will take for
an AP to detect the loss in con-
nectivity to the controller, but can
reduce internet bandwidth con-
sumed by a remote AP.
1-60 secs 1 sec
led-mode
The operating mode for the AP
LEDs. This option is available on
all 802.11n indoor APplatforms.
normal
normal
Display LEDs in normal mode.
off
Turn off all LEDs.
lms-hold-down-
period
Time, in seconds, that the
primary LMS must be available
before an AP returns to that
LMS after failover.
1-3600 600 seconds
lms-ip
In multi-controller networks,
this parameter specifies the IP
address of the local
management switch (LMS)—
the Dellcontroller—which is
responsible for terminating
user traffic from the APs, and
processing and forwarding the
traffic to the wired network.
This can be the IP address of
the local or master controller.
— —
Dell Networking W-Series ArubaOS 6.4.x | User Guide ap system-profile | 230