Users Guide

2291 | wlan hotspot anqp-roam-cons-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
wlan hotspot anqp-roam-cons-profile
wlan hotspot anqp-roam-cons-profile <profile-name>
clone <profile-name>
no ...
roam-cons-oi <roam-cons-oi>
roam-cons-oi-len <roam-cons-oi-len>
Description
This command configures the Roaming Consortium OI information to be sent in an Access network Query
Protocol (ANQP) information element in a Generic Advertisement Service (GAS) query response.
Syntax
Parameter Description
clone <profile-name>
Make a copy of an existing ANQP Roaming Consortium
profile.
no
Negate any existing parameter.
roam-cons-oi <roam-cons-oi>
Send the specified roaming consortium OI in a GAS query
response. The OI must be a hexadecimal number 3-5
octets in length.
roam-cons-oi-len <roam-cons-oi-len>
Length of the OI. The value of the roam-cons-oi-len
parameter must equal upon the number of octets of the
roam-cons-oi field.
l 0: 0 Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
Usage Guidelines
Organization Identifiers (OIs) are assigned to service providers when they register with the IEEE registration
authority. The Roaming Consortium Information Elements (IEs) contain information identifying the network
and service provider, whose security credentials can then be used to authenticate with the AP transmitting this
element.
Use the wlan hotspot anqp-roam-cons-profile command to define the OI for the hotspot service provider in
the ANQP Roaming Consortium profile. Values configured in this profile will not be sent to clients unless you:
1. Associate the ANQP Roaming Consortium profile an ANQP advertisement profile. (wlan hotspot
advertisement profile <profile-name> anqp-roam-cons-profile <profile-name> )
2. Associate the ANQP advertisement profile with a Hotspot profile. (wlan hotspot h2-profile
advertisement-profile <profile-name> )
3. Enable the hotspot feature within that Hotspot profile. (wlan hotspot h2-profile <profile-name>
hotspot-enable )
To identify additional Roaming consortium OIs used by the service provider’s top three roaming partners,
configure the roam-cons-oi-1, roam-cons-oi-2 or roam-cons-oi-3 parameters in the Hotspot Profile.