Users Guide

227 | ap system-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Description
This command configures an AP system profile.
Syntax
Parameter Description Range Default
<profile>
Name of this instance of the
profile. The name must be 1-63
characters.
— “default”
aeroscout-rtls-
server
Enables the AP to send RFID
tag information to an
AeroScout real-time asset
location (RTLS) server.
RTLS station reporting includes
information for APs and the
clients that the AP has
detected. If you include the
include-unassoc-sta
parameter, the station reports
will also include information
about clients not associated to
any AP. By default,
unassociated clients are not
included in station reports.
— —
am-scan-rf-band
Scanning band for multiple RF
radios
a, g, all all
a
Set the scanning band to
802.11a only
— all
g
Set the scanning band to
802.11g only
— all
all
Set the scanning band to apply
to all bands
— all
ap-arp-attack-protection
Drop ARP packets coming from
wired or wireless clients with
AP gateway IP address. In
other words, disallow ARP
attack from un-trusted ports.
— enabled
mcast-aggr
Enable multicast aggregation
at AP.
— disabled
mcast-aggr-allowed-vlan
<vlan-list>
Enable list of VLANs where
APmulticast aggregation is
allowed.
— disabled