Users Guide

wlan bcn-rpt-req-profile
wlan bcn-rpt-req-profile <profile-name>
channel <channel>
clone <source>
interface <interface>
measure-dur-mandatory
measure-duration <measure-duration>
measure-mode
no
random-interval <random-interval>
reg-class {1|12}
request-info <request-info>
rpt-condition <rpt-condition>
rpt-detail
ssid <ssid>
Description
Configures a Beacon Report Request Profile to provide the parameters for the Beacon Report Request frames.
Syntax
Parameter
Description Range Default
<profile-name>
Name of this instance of the
profile. The name must be 1-63
characters.
— “default”
channel <channel>
This option is used to set the
Channel field in the Beacon
Report Request frame. The
Channel value can be set to one
of the following:
l The channel of the AP (when
Measurement Mode is set to
either 'Passive' or 'Active-All
channels')
l 0 (when Measurement Mode
is set to 'Beacon Table')
l 255 (when Measurement
Mode is set to 'Active-
Channel Report')
For
802.11b
/g band:
1 to 14
For
802.11a
band: 36
to 165
255
clone <source>
Creates a copy of the Beacon
Report Request Profile specified
as the <source>.
<source> is the name of an
existing Beacon Report Request
Profile from which parameter
values are copied.
— —
Dell Networking W-Series ArubaOS 6.4.x | User Guide wlan bcn-rpt-req-profile | 2256