Users Guide

Parameter Description Range Default
idp-cert
Specifies the IDP certificate name con-
figured in the controller
— —
mgmt-auth
Specifies the authentication
method for the management user;
you can choose to use either
username/password or
certificates, or both
username/password and
certificates.
usernam
e/
passwor
d,
certificat
e
usernam
e/
passwor
d
no
Negates any configured
parameter.
— —
session-timeout <session-timeout>
Specifies the amount of time after
which the WebUI session times out
and requires login for continued
access.
30-3600
seconds
900
seconds
ssl-protocol
Specifies the Secure Sockets Layer
(SSL) or Transport Layer Security
(TLS) protocol version used for
securing communication with the
web server:
l TLS v1
l TLS v1.1
l TLS v1.2
— tlsv1
tlsv1.1
tlsv1.2
switch-cert
Specifies the name of the server
certificate associated with WebUI
access. Use the show crypto-local
pki ServerCert command to see
the server certificates installed in
the controller.
— default
web-https-port-443
Enables WebUI access on the HTTPS
port (443) .When you connect to the
WebUI using https (tcp port 443), the
controller continues using port 443
and no longer redirects to port 4343.
— —
web-lync-listen-port
{http <listen-port>}|
{https <listen-port>}
Configures the port number on
which Lync Network Diagnostic
(LND), a Microsoft® plug-in, sends
HTTP/HTTPS messages to Dell
controller.
NOTE: Disable the media
classification ACL before using this
feature. See ip access-list session.
1024-
65535
0 (feature
disabled)
web-max-clients <web-max-client>
Configures the web server’s
maximum number of supported
concurrent clients.
25-320 25
Dell Networking W-Series ArubaOS 6.4.x | User Guide web-server profile | 2230