Users Guide

2229 | web-server profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
web-server profile
web-server profile
bypass-cp-landing-page
captive-portal-cert <name>
ciphers {high|low|medium}
idp-cert <idp-cert>
mgmt-auth [certificate] [username/password]
no ...
session-timeout <session-timeout>
ssl-protocol [tlsvl | tlsvl.1 | tlsvl.2]
switch-cert <name>
web-https-port-443
web-lync-listen-port {http <listen-port>}|{https <listen-port>}
web-max-clients <web-max-clients>
Description
This command configures the controller’s web server.
Syntax
Parameter Description Range Default
bypass-cp-landing-page
Disables the bypass captive portal
landing page. On disabling this
feature, non-browser apps
continue to request Captive Portal
login page from the controller.
NOTE: This increases the load of the
httpd process of the controller.
NOTE: The landing page contains
the meta-refresh tag to reload the
page using real browser
applications.
— enabled
captive-portal-cert
Specifies the name of the server
certificate associated with captive
portal. Use the show crypto-local
pki ServerCert command to see
the server certificates installed in
the controller.
— default
ciphers
Configures the strength of the
cipher suite:
high: encryption keys larger than
128 bits
low: 56 or 64 bit encryption keys
medium: 128 bit encryption keys
NOTE: This command is
not available in FIPS software
images because ciphers are pre-
configured only to acceptable
values.
high, low,
medium
high