Users Guide

Parameter Description Range Default
tracking master-up-time add
Instructs the controller to add
the specified value to the
existing priority level.
The combined priority and
tracking values cannot exceed
255.
If the priority value exceeds
255, the controller displays an
error message similar to the
following:
Error: Vrrp 30 priority + tracking
value exceeds 255
0-255 —
tracking vlan
Configures VRRP tracking based
on VLAN state transitions.
You can track a combined
maximum of 16 VLAN and
Layer-2 interfaces.
— —
sub
Decreases the priority of the
VRRP instance by the specified
amount. When the VLAN comes
up again, the value is restored
to the previous priority level.
The combined priority and
tracking values cannot exceed
255.
If the priority value exceeds
255, the controller displays an
error message.
0-255 —
vrrp-master-
state
Specifies the VRID to use for
tracking the state of the VRRP
master controller.
1-255 —
vrrp-master-
state add
Instructs the controller to add
the specified value to the
existing priority level.
The combined priority and
tracking values cannot exceed
255.
If the priority value exceeds
255, the controller displays an
error message similar to the
following:
Error: Vrrp 30 priority + tracking
value exceeds 255
0-255 —
vlan
Specifies the VLAN ID of the
VLAN on which VRRP will run.
1-4094 —
Dell Networking W-Series ArubaOS 6.4.x | User Guide vrrp | 2224