Users Guide

2223 | vrrp Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
priority
Defines the priority level of the
VRRP instance for the controller.
This value is used in the election
mechanism for the master.
A higher number specifies a
higher priority.
The default priority setting is
adequate for most networks.
100 1-255
shutdown
Administratively shutdown
VRRP. When down, VRRP is not
active, although the controller
maintains the configuration
information.
To start the VRRP instance, use
no shutdown.
— enabled
(VRRP is
down)
tracking interface
Configures VRRP tracking based
on Layer-2 interface state
transitions. You can configure
this on Fast Ethernet or Gigabit
Ethernet interfaces.
You can track a combined
maximum of 16 VLAN and
Layer-2 interfaces.
— —
<slot>
<slot> is always 1. — —
<port>
Number assigned to the
network interface embedded in
the controller. Port numbers
start at 0 from the left-most
position.
— —
sub
Decreases the priority of the
VRRP instance by the specified
amount. When the interface
comes up again, the value is
restored to the previous priority
level.
The combined priority and
tracking vales cannot exceed
255.
If the priority value exceeds
255, the controller displays an
error message.
0-255 —
tracking master-up-time duration
Monitors how long the
controller has been master for
the VRRP instance.
0-1440
minutes
—