Users Guide

Usage Guidelines
Every client in a user-centric network is associated with a user role. All wireless clients start in an initial role.
From the initial role, clients can be placed into other user roles as they pass authentication.
Example
The following command configures a user role:
(host) (config) #user-role new-user
dialer default-dialer
pool pptp-pool-1
Command History
Version Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.4.1 The stateful-ntlm and wispr parameters were introduced.
ArubaOS 6.1 The ipv6 session-acl parameter was removed. The session-acl parameter
is common for both IPv4 and IPv6 ACLs.
ArubaOS 6.4 The bandwidth-contract app, bandwidth-contract appcategory, band-
width-contract exclude, traffic-control-profile, and sso parameters were
introduced.
ArubaOS 6.4.1.0 The check-for-accounting parameter was introduced.
ArubaOS 6.4.2.0 The web-cc-category, web-cc-reputation and web-cc disable para-
meters were introduced.
Command Information
Platforms Licensing Command Mode
All platforms This command requires the
PEFNG license.
Config mode on master controllers
Dell Networking W-Series ArubaOS 6.4.x | User Guide user-role | 2196