Users Guide

Parameter Description Range Default
pptp: When a user
negotiates a Point-to-
Point Tunneling Protocol
(PPTP) session, specifies
an address pool
configured with the
pptp ip local pool
command.
<name>
Name of the L2TP or
PPTP pool to be applied.
— —
qos-profile
Applies a QOS profile to
the user role.
— —
reauthentica
tion-interval
Interval, in minutes or
seconds, after which the
client is required to
reauthenticate.
l 0-4096 in
minutes
l 0-245760
in seconds
0
(disabled)
registration-role
If enabled, a user is
forced to do MAC-based
authentication every
time the user connects
to the network.
— disabled
session-acl <string>
Session ACL configured
with the ip access-list
session command. You
can specify both IPv4
and IPv6 ACLs.
— —
ap-group
(Optional) AP group to
which this ACL applies.
— —
position
(Optional) Position of
this ACL relative to
other ACLs that you can
configure for the user
role. 1 is the top.
— (last)
sso
Applies an SSO profile
to the user role.
— —
statefule-kerberos
Applies a stateful
Kerberos profile to the
user role.
— —
stateful-ntlm
Apply stateful NTLM
authentication to the
specified user role
Dell Networking W-Series ArubaOS 6.4.x | User Guide user-role | 2194