Users Guide

uplink
crypto-local
uplink {cellular priority <prior>}|disable|enable|{wired priority <prior>}|{wired vlan <id>}
Description
Manage and configure the uplink network connection.
Syntax
Parameter Description Range
cellular priority <prior>
Set the priority of the cellular uplink. By default, the
cellular uplink is a lower priority than the wired uplink;
making the wired link the primary link and the cellular
link the secondary or backup link.
Configuring the cellular link with a higher priority than
your wired link priority will set your cellular link as the
primary controller link.
1-255
enable
Enable the uplink manager.
—
disable
Disable the uplink manager.
—
wired priority <prior>
Set the priority of the wired uplink. Each uplink type has
an associated priority; wired ports having the highest
priority by default.
1-255
wired vlan <id>
Define the VLAN identification (ID) of the uplink VLAN . A
maximim of four wired VLANs can be defined
1-4094
Usage Guidelines
The W-600 Series controllers supports multiple 3G cellular uplinks in addition to its standard wired ports,
providing redundancy in the event of a connection failure. If a W-600 Series' wired link cannot access the
internet, the controller can fail over to a secondary cellular link and continue routing traffic.
The uplink VLAN manager is enabled by default on branch controller uplinks. Master or local (non-branch)
controllers using the PAN portal feature must issue the uplink enable command to enable the uplink
manager.
Related Commands
Command Description
pan-options
This command configures options to integrate a branch controller with a
Palo Alto Networks (PAN) firewall.
show uplink
Displays uplink configuration details on W-600 Series or W-7000 Series
controllers.
Dell Networking W-Series ArubaOS 6.4.x | User Guide uplink | 2186