Users Guide

syslocation
syslocation <syslocation>
Description
This command configures the name of the system location for the controller.
Syntax
Parameter Description
syslocation
An alphanumeric string that specifies the name of the system location.
Usage Guidelines
Use this command to indicate the location of the controller. You can use a combination of numbers, letters,
characters, and spaces to create the name. To include a space in the name, use quotation marks to enclose the
text string.
To change the existing name, enter the command with a different string. To unconfigure the location, enter “”
at the prompt.
Example
The following command defines SalesLab as the location for the controller:
(host) # syslocation “Building 10, second floor, room 21E”
syscontact LabTechnician
Command History
This command was introduced in ArubaOS 3.1.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.4.x | User Guide syslocation | 2166