Users Guide

Command Description
l show airgroupservice
l show airgroup servers
l show airgroup users
The dlna, mdns , and static parameters are introduced as part of
the show airgroup cache entries command output.
show airgroupservice The dlna, mdns, and verbose parameters are introduced as part
of this command output.
show app lync traffic-control The profile-name parameter is introduced as part of this
command output.
show datapath The following parameters are introduced as part of this command
output:
l dpi
l session dpi
l session ipv6 dpi
l session session-id dpi
show ipv6 interface The tunnel parameter is introduced as part of this command
output.
show ipv6 mld config The ssm-range parameter is introduced as part of this command
output.
show ipv6 mld group The mode and age parameters are introduced.
show ntp peer The IPv6 parameter is introduced.
show ntp servers Flags indicating the status of the server, are introduced.
show ntp status The following parameters are introduced as part of this command
output:
l time since restart
l packets received
l packets processed
l current version
l previous version
l declined
l access denied
l bad length or format
l bad authentication
l rate exceeded
Dell Networking W-Series ArubaOS 6.4.x | User Guide The ArubaOS Command-Line Interface | 21