Users Guide

2093 | show wlan ht-ssid-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
show wlan ht-ssid-profile
show wlan ht-ssid-profile [<profile>]
Description
Show a list of all High-throughput SSID profiles, or display detailed configuration information for a specific
High-throughput SSID profile.
Syntax
Parameter Description
<profile> Name of a High-throughput SSID profile.
Usage Guidelines
Issue this command without the <profile> parameter to display the entire High-throughput SSID profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has two configured High-throughput SSID profiles. The
References column lists the number of other profiles with references to the High-throughput SSID profile,
and the Profile Status column indicates whether the profile is predefined. (User-defined profiles will not have
an entry in the Profile Status column.)
(host) #show wlan ht-ssid-profile
High-throughput SSID profile List
---------------------------------
Name References Profile Status
---- ---------- --------------
HT-profile1 16default2 1
Total:2
The following example shows configuration settings defined for the profile default2.
(host) #show wlan ht-ssid-profile default
High-throughput SSID profile "default2"
--------------------------------------
Parameter Value
--------- -----
40 MHz channel usage Enabled
BA AMSDU Enable Enabled
Temporal Diversity Enable Disabled
High throughput enable (SSID) Enabled
Legacy stations Allowed
Low-density Parity Check Enabled
Maximum number of spatial streams usable for STBC reception 1
Maximum number of spatial streams usable for STBC transmission 1
MPDU Aggregation Enabled
Max received A-MPDU size 65535 bytes
Max transmitted A-MPDU size 65535 bytes
Min MPDU start spacing 8 usec
Short guard interval in 20 MHz mode Enabled
Short guard interval in 40 MHz mode Enabled