Users Guide

show wlan hotspot anqp-nwk-auth-profile
show wlan hotspot anqp-nwk-auth-profile [<profile-name>]
Description
The output of this command displays settings for a WLAN ANQP network authentication profile.
Syntax
Parameter Description
<profile>
Name of an ANQP Network Authentication profile.
Usage Guidelines
Access Network Query Protocol (ANQP) profiles define the 802.11u Information Elements (IEs) to be broadcast
by an 802.11u-capable AP. Use this command to select one of each type of ANQP profile to be associated with
the advertisement profile.
Issue this command without the <profile> parameter to display the entire ANQP network authentication
profile list, including profile status and the number of references to each profile. Include a profile name to
display detailed configuration information for that profile.
Examples
The example below shows that the controller has two configured network authentication profiles. The
References column lists the number of other profiles with references to the network authentication profile,
and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have
an entry in the Profile Status column.
(host) # show wlan hotspot anqp-nwk-auth-profile
ANQP Network Authentication Profile List
----------------------------------------
Name References Profile Status
---- ---------- --------------
auth1 0
default 0
Total:2.
The following example displays the configuration settings for the profile default.
(host) #show wlan hotspot anqp-nwk-auth-profile default
ANQP Network Authentication Profile "default"
------------------------------------------------
Parameter Value
--------- -----
Type of Network Authentication acceptance
Redirect URL N/A
The output of this command includes the following parameters:
Dell Networking W-Series ArubaOS 6.4.x | User Guide show wlan hotspot anqp-nwk-auth-profile | 2074