Users Guide

ManualsBrandsDell ManualsAccess PlatformsW-Series Controller AOS

2011

2011 | show voice trace Dell Networking W-Series ArubaOS 6.4.x| User Guide

show voice trace

lync [count <num> | ip <ipaddr> | mac <macaddr>]

sccp [count <num> | ip <ipaddr> | mac <macaddr>]

sip [count <num> | ip <ipaddr> | mac <macaddr>]

Description

Displays the signaling message trace details for either Lync ALG, Signaling Connection Control Part (SCCP), or

Session Initiation Protocol (SIP) clients.

Syntax

Parameter Description

count <num>

View the specified number of the latest SIP, SCCP, or Lync voice client

messages. Specify an integer value.

ip <ipaddr>

Specify the IP address of a client to display its SIP, SCCP, or Lync voice

client messages.

mac <macaddr>

Specify the IP address of a client to display its SIP, SCCP, or Lync voice

client messages.

Example

The output of this command shows signaling message trace. The first example shown is for a SIP client.

(host) #show voice trace sip count 4

SIP Voice Client(s) Message Trace

---------------------------------

ALG Client Name Client(MAC) Client(IP) Event Time

--- ----------- ----------- ---------- ----------

SIP 6201 00:24:7d:99:49:01 10.15.20.59 Aug 17 10:21:22

Direction Msg BSSID

--------- --- -----

Server-To-Client 200_OK 00:1a:1e:a8:2d:80

Client-To-Server REGISTER 00:1a:1e:a8:2d:80

Server-To-Client 4XX_REQUEST_FAILURE 00:1a:1e:a8:2d:80

Client-To-Server REGISTER 00:1a:1e:a8:2d:80

Num of Rows:4

The second example shown is for Lync ALG, displaying the exchange between a Lync server and Lync client.

The output is divided into multiple sections to better fit on the pages of this document. In the actual

command-line interface, it appears in a single, long table.

(host) #show voice trace lync

Lync Voice Client(s) Message Trace

----------------------------------

ALG Client Name Client(MAC) Client(IP) Event Time