Users Guide

show voice real-time-analysis
show voice real-time-analysis [sta <client MAC address>]
Description
Displays the call quality parameters based on the call quality analysis on the RTP media streams for voice calls.
Syntax
Parameter Description
sta
View the detailed real time call quality analysis report for a voice client
based on the MAC address. You can also view the average call quality
values for all the clients without passing the MAC address.
NOTE: The real time call quality reports are supported and applicable only
for clients in decrypt-tunnel and split-tunnel modes.
Example
The output of this command shows the detailed call quality parameters based on the RTP media stream for a
specific voice client.
(host) #show voice real-time-analysis sta 1c:ab:a7:2d:75:6b
WARNING: This command will be deprecated, please use show ucc commands instead
Real-Time Analysis Detailed Report
----------------------------------
Time Jitter(D)(usec) Pkt-loss(D)(%) Delay(D)(usec) UCC Score(D) Forward mode
---------------- --------------- -------------- -------------- --------- ------------
Mar 15 17:05:34 2.000 1.000 255.000 88.360 tunnel
Mar 15 17:05:32 2.000 5.000 211.000 78.360 tunnel
Mar 15 17:05:30 3.000 7.000 203.000 73.360 tunnel
Mar 15 17:05:28 2.000 2.000 271.000 86.360 tunnel
Command History
Version Description
ArubaOS 6.0 Command introduced.
ArubaOS 6.3 A new column, Forward mode was introduced in the output of the com-
mand.
ArubaOS 6.4 The following parameters were deprecated:
l Jitter(U)(msec)
l rvalue(U)
l Pkt-loss(U)(%)
l Delay(U)(usec)
l Jitter(D)(msec)
l rvalue(D)
Dell Networking W-Series ArubaOS 6.4.x | User Guide show voice real-time-analysis | 2004