Users Guide

1947 | show upgrade configuration Dell Networking W-Series ArubaOS 6.4.x| User Guide
show upgrade configuration
show upgrade configuration
Description
The output of this command shows the current upgrade configuration, including profile settings, image files
and targets.
Syntax
No parameters
Usage Guidelines
The centralized image upgrade feature allows a master controller to automatically upgrade its associated local
controllers by sending an image from an image server to one or more local controllers. This feature can and
supports up to 100 simultaneous image downloads, and is enabled and configured on a master controller only.
Example
(host) #show upgrade configuration
Upgrade configuration
---------------------
Parameter Value
--------- -----
Protocol scp
Server IP address 10.1.1.41
Username tftp
Password ******
File path /tftpboot
Max downloads 100
Reboot automatically true
Image file ArubaOS_W-620_6.3.0.0_37916 (verified)
ArubaOS_W-3000 Series_6.3.0.0_37916 (not verified)
ArubaOS_W-7200 Series_6.3.0.0_37916 (verified)
Upgrade target
--------------
IP address Netmask
---------- -------
192.0.2.0 255.255.255.0
The output of this command includes the following information:
Parameter Description Range Default
protocol
Specify the protocol used to send the software
upgrade from the image server to the local controller.
l TFTP
l FTP
l SCP
- TFTP
Server IP
IP address of the image server. - -
Username
If the protocol parameter is set to FTP or SCP, this
parameter displays the username that ArubaOS uses
to connect to the image server
- -