Users Guide

1929 | show ucc call-info cdrs Dell Networking W-Series ArubaOS 6.4.x| User Guide
Column Description
End-to-End Delay(ms)
/Jitter(ms)/PktLoss(%)
Displays the end-to-end delay (in milliseconds), jitter (in milliseconds),
and packet loss (in percentage).
NOTE: This field takes the wired and wireless network QoS parameters
into consideration.
Command History
Version Description
ArubaOS 6.4 Command introduced.
ArubaOS 6.4.3.0 The UCC-Band, MOS, and MOS-Band fields were introduced as part of the
show ucc call-info cdrs command output.
Following changes were made as part of the show ucc call-info cdrs cid
<cid> command output:
l Moved the UCC Score, Client Health, MOS parameters from the CDR-
Basic section to the Call Samples section heading.
l Added a new Call Sample(per 60 secs) section heading. This section
displays the properties of media session like IP, port, codec, DSCP, and
WMM values.
l Renamed the CDRS-Detail section heading to WLAN Quality-Details.
l Added a new End-to-End Quality-Details section heading. This section
displays the MOS, MOS band, delay, jitter, packet loss values.
l Under the Call Samples section heading, added the MOS, MOS-Band,
End-to-End Delay(ms/Jitter(ms)/PktLoss(%) fields.
Following changes were made as part of the show ucc call-info cdrs
detail command output:
l Removed the Src Port, Dest Port, Codec, DSCP, Orig DSCP, WMM-AC,
Orig WMM-AC fields.
l Merged the Delay(msec), Jitter(msec), and Packet Loss (%) fields to
WLAN Delay(ms)/Jitter(ms)/PktLoss(%).
l Added the MOS, MOS-Band, End-to-End Delay(ms)/Jitter(ms)
/PktLoss(%) fields.
Command Information
Platforms Licensing Command Mode
All platforms
This command requires the
PEFNG license.
Config or Enable mode on master or
local controllers.