Users Guide

show tpm cert-info
show tpm cert-info
Description
Displays the TPM and Factory Certificate information on MIPS controllers (W-6000M3, W-3000 Series, and W-
600 Series).
Syntax
No parameters.
Usage Guidelines
Use this command to verify that TPM and factory certificates are installed as expected. This command should
be executed before enabling CPSec on MIPS controllers (W-6000M3, W-3000 Series, and W-600 Series).
Example
In the example below, the TPM and certificates are installed.
(host)#show tpm cert-info
subject= /CN=AF0000168::00:0b:86:f0:33:e0
issuer= /DC=com/DC=arubanetworks/DC=ca/CN=DEVICE-CA2
serial=1F023F05000000015087
notBefore=Jan 30 01:38:57 2009 GMT
notAfter=Jan 25 01:38:57 2029 GMT
In the example below, the controller is not able to verify the TPM or Factory Certificate information.
(host)#show tpm cert-info
Cannot get TPM and Factory Certificate Info
TPM and/or Factory Certificates might be missing.
Command History
Release Modification
ArubaOS 5.0 Command introduced
Command Information
Platforms Licensing Command Mode
MIPS controllers (W-6000M3, W-3000
Series, and W-600 Series)
Base operating system Enable Mode
Dell Networking W-Series ArubaOS 6.4.x | User Guide show tpm cert-info | 1918