Users Guide

Parameter Description
Adaptive Radio
Management (ARM) Profile
Name of an Adaptive Radio Management profile associated with this
802.11a profile.
High-throughput Radio
Profile
Name of a High Throughput Radio profile associated with this 802.11a
profile.
Maximum Distance Maximum distance between a client and an AP or between a mesh point
and a mesh portal, in meters. This value is used to derive ACK and CTS
timeout times. A value of 0 specifies default settings for this parameter,
where timeouts are only modified for outdoor mesh radios which use a
distance of 16km..
Spectrum Monitoring If enabled, the AP operates as a hybrid AP that can simultaneously serve
clients and monitor a single channel for spectrum analysis data.
Spectrum Monitoring
Profile
The spectrum monitoring profile referenced by APs using this 802.11a
radio profile. For details, see rf spectrum-profile on page 784
AM Scanning Profile The AM scanning profile referenced by APs using this 802.11a radio
profile. For details, seerf am-scan-profile on page 734
Command History
Release Modification
ArubaOS 3.0 Command introduced.
ArubaOS 3.3.2 Introduced support for the high-throughput IEEE 802.11n standard.
ArubaOS 3.4.0 Support for the following parameters:
l Spectrum load balancing
l RX Sensitivity Tuning Based Channel Reuse
l RX Sensitivity Threshold
l ARM/WIDS Override
ArubaOS 3.4.2 Support for the Beacon Regulate parameter
ArubaOS 6.0 Support for the following parameters:
l AM Scanning Profile
l Advertised regulatory max EIRP
l Spectrum Load balancing mode
l Spectrum load balancing update interval (sec)
ArubaOS 6.1 Support for the following parameters:
l Spectrum Monitoring
Dell Networking W-Series ArubaOS 6.4.x | User Guide show rf dot11a-radio-profile | 1846