Users Guide

1749 | show ntp status Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
packets processed
Number of packets received in response to previous packets sent.
current version
Number of packets matching the current NTP version.
previous version
Number of packets matching the previous NTP version.
declined
Number of packets declined.
access denied
Number of packets for which access has been denied.
bad length or format
Number of packets with invalid length, format or port number.
packets received
Total number of packets received.
bad authentication Number of NTP packets that failed to be authenticated.
rate exceeded
Number of packets discarded due to rate limitation.
system peer The IP address of the peer NTP server.
system peer mode The peer mode of this remote association:
l Symmetric Active
l Symmetric Passive
l Client
l Server
l Broadcast
leap indicator This parameter indicates whether or not a leap-second should be inserted
or removed at the end of the last day of the current month.
l 00 no warning
l 01 +1 second (following minute has 61 seconds)
l 10 -1 second (following minute has 59 seconds)
stratum The stratum level of the peer
precision The advertised precision of the switch. This value can range from -4 and -
20, inclusive.
root distance Total round trip delay to the stratum 1 reference clock.
root dispersion Total dispersion to the stratum 1 reference clock. This value is a cumulative
measure of all errors associated with the network hops and servers
between the NTP server and its stratum 1 server.
reference ID IPv4/IPv6 address of the remote NTP server.