Users Guide
Commands in ArubaOS 6.4.0.0
New Commands
The following commands are introduced in the ArubaOS 6.4.0.0:
Command Description
airgroup static mdns-record This command enables an administrator to add mDNS static
records to cache using the following methods:
Group mDNS static records
Individual mDNS static records
app lync traffic-control This command creates a traffic control profile that allows the
controller to recognize and prioritize a specific type of Lync traffic
in order to apply QoS through the Lync Application Layer Gateway
(ALG).
dpi This command configures Deep-Packet Inspection and the global
bandwidth contract for an application or application category for
the AppRF feature.
iap trusted-branch-db This command configures an IAP-VPN branch as trusted.
pan active-profile This command activates a configured PAN profile.
pan profile This command is used to configure a PAN profile.
show aaa load-balance statistics This command displays the load balancing statistics for RADIUS
servers.
show lldp interface This command displays the LLDP interfaces information.
show lldp neighbor This command displays information about LLDP peers.
show lldp statistics This command displays the LLDP statistics information.
show iap detailed-table This command displays the details of all the branches terminating
at the controller.
show pan active-profile This command displays the currently active PANī¢profile.
show pan-options This command displays all configured PAN profiles.
show pan state This command displays the current status of associated PAN
firewalls.
show pan statistics This command displays PAN profile statistics.
show sso idp-profile This command displays the configured SSO IDP profiles.
Dell Networking W-Series ArubaOS 6.4.x | User Guide The ArubaOS Command-Line Interface | 17