Users Guide

Parameter Description
Deny inter user bridging
If enabled this setting prevents the forwarding of
Layer-2 traffic between wired or wireless users.
You can configure user role policies that prevent
Layer-3 traffic between users or networks but
this does not block Layer-2 traffic.
Log all received ICMP errors
Shows if the controller will log received ICMP
errors.
Per-packet logging
If active, and logging is enabled for the
corresponding session rule, this feature logs
every packet.
Blacklist Grat ARP attack client
If enabled, blacklist clients exceeding the
Gratuitous ARP attack rate.
Stateful SIP Processing
Shows if the controller has enabled or disabled
monitoring of exchanges between a voice over IP
or voice over WLAN device and a SIP server. This
option should be enabled only when thee is no
VoIP or VoWLAN traffic on the network
Allow tri-session with DNAT
Shows if the controller allows three-way session
when performing destination NAT.
Disable FTP server
If active, this feature disables the FTP server on
the controller.
Blacklist ARP attack client
If enabled, blacklist clients exceeding the ARP
attack rate.
Monitor ARP attack
Shows the status of the ARP attack monitor.
Monitor Gratuitous ARP attack
Shows the status of the Gratuitous ARP attack
monitor.
GRE call id processing
If active the controller creates a unique state for
each PPTP tunnel.
Session Idle Timeout
Shows if a session idle timeout interval has been
defined.
WMM content enforcement
If traffic to or from the user is inconsistent with
the associated QoS policy for voice, this feature
reclassifies traffic to best effort and data path
counters are incremented.
Session VOIP Timeout
If enabled, a idle session timeout is defined for
sessions that are marked as voice sessions.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show firewall | 1478