Users Guide

show dot1x ap-table static-wep
show dot1x ap-table static-wep
Description
Shows the static WEP keys of all APs.
Syntax
No parameters.
Example
Issue this command to display the static WEP keys of all APs.
Static-WEP Key Information
--------------------------
AP-MAC Key1/Size Key2/Size Key3/Size Key3/Size
------ --------- --------- --------- ---------
Num APs: 0
The output of this command includes the following parameters:
Parameter Description
AP-MAC
AP’s MAC address
Key1/Size
WEP key 1 and its size
Key2/Size
WEP key 2 and its size
Key3/Size
WEP key 3 and its size
Key3/Size
WEP key 3 and its size
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master
controllers
Dell Networking W-Series ArubaOS 6.4.x | User Guide show dot1x ap-table static-wep | 1448