Users Guide

Command History
Version
Description
ArubaOS 3.0 Command introduced.
ArubaOS 5.0 The tcp parameter was introduced.
ArubaOS 6.1 The crypto counters parameter now displays a number of
TKIP/AESCCM/AESGCM decriptions per priority level along with any counter
errors per priority.
The ipv6 filter option is added to the following parameters in the
command:
l session
l tunnel
l user
l route-cache
l route
l ip-reassembly
ArubaOS 6.1.3.2 The debug opcode parameter was introduced. Issue this command only
under the supervision of Dell technical support.
ArubaOS 6.2 l The firewall-agg-sess parameter is introduced.
l The heartbeat parameter is introduced.
ArubaOS 6.3 The following parameters were introduced:
l a-msdu
l mobility
l tunnel-group
The output of the bridge ap-name parameter, displays a new flag b -
blocked by STP to indicate whether the firewall considers the port to be
blocked.
ArubaOS 6.4 The following parameters were introduced:
l dpi
l session dpi
l session ipv6 dpi
l session session-id dpi
ArubaOS 6.4.1.0 The following parameters were introduced as part of the show datapath
frame command output:
l Excessive ARP Requests
l Excessive Gratuitous ARP Requests
Dell Networking W-Series ArubaOS 6.4.x | User Guide show datapath | 1438