Users Guide

1433 | show datapath Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
heartbeat
Displays the datapath heartbeat tunnel details.
ipv4
Displays the TCP tunnel table filtered on IPv4 entries.
ipv6
Displays the TCP tunnel table filtered on IPv6 entries.
station-list
Displays the list of stations on the tunnel.
table
Tunnel table statistics.
tunnel-group
Displays the tunnel group, active status and members.
user
Displays datapath user statistics such as current entries, pending
deletes, high water mark, maximum entries, total entries, allocation
failures, invalid users and maximum link length.
ap-name <ap-name>
Name of AP.
counters
User counters.
ip-addr <ip-address>
IP address of the AP.
ipv4
Displays datapath IPv4 user entries and statistics such as current
entries, pending deletes, high water mark, maximum entries, total
entries, allocation failures, invalid users, and maximum link length.
ipv6
Displays datapath IPv6 user entries and statistics such as current
entries, pending deletes, high water mark, maximum entries, total
entries, allocation failures, invalid users, and maximum link length.
table
User table statistics.
utilization
Displays the current CPU utilization of all datapath CPUs.
vlan
Displays VLAN table information such as VLAN memberships inside
the datapath including Layer 2 tunnels which tunnel L2 traffic.
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of AP.
table
Displays VLAN number, flag, port and datapath VLAN multicast
entries.
vlan-mcast
Displays the datapath VLAN multicast table.
ap-name <ap-name>
Name of the AP.