Users Guide
Parameter Description
l WebCCU: URL for that session entry.
station
Displays datapath station association table statistics.
counters
Display the current and high water mark amount of 802.11
associated wireless devices on a controller. Values output from this
command represent the water-marks since the last boot of the
controller. This is the same value obtainable from the Num
Associations output from the show stm connectivity command.
mac <macaddr>
Hardware address, in hexadecimal format.
tcp
Displays contents of the tcp tunnel table. This command displays all
tcp tunnels that are terminated by the controller.
app <app>
Name of the application.
counters
Displays the tcp tunnel statistics.
tunnel
Displays the tcp tunnel table.
table
This command displays the Datapath Station Table Statistics detail.
Display all associated wireless devices on the controller with their
corresponding AP BSSID and VLAN ID.
Displays the wireless device is associated with the correct
encryption type (if the device is associated to an AP BSSID that has
encryption enabled and verifies whether the controller is having a
problem in decrypting the wireless device’s frames.
tunnel
Displays contents of the datapath tunnel table. This command
displays all the tunnels that are terminated by the controller,
including Dell AP's GRE tunnels. For example, a GRE tunnel is
created and terminated on the Dell controller for every SSID/BSSID
configured on the Dell AP. You can filter and view the tunnel using
the following options:
l counters
l encaps
l heartbeat
l ipv4
l ipv6
l station-list
l table
l tunnel-id
l verbose
counters
Tunnel counters.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show datapath | 1432