Users Guide

1429 | show datapath Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
counters
Nat counters.
ip-addr <ip-address>
IP address of the AP.
nexthop-list
Displays the following types of information about the dapath for packets
routed to next-hop devices.
l SOS Dest : Unique datapath identifier for each next-hop list
l Active IP:
l NhIdx: Unique identifier for each next-hop list
l NhVer: Internally generated number used to synchronize the
next-hop and session tables.
papi
Displays datapath papi counters including: SUM/CPU, addr,
description, and value.
port
Displays the datapath port table information. This includes the port
number, PVID, Ingress ACL, Egress ACL, Session ACL, and the
following flags:
l B: Blocked by the Spanning Tree protocol
l L: LSG
l M: Tunneled node
l Q: Trunk
l T: Trusted
l X: xSec
l Z: QinQ
link-event
Displays port link up and link down event counters.
monitor
Displays the monitor port configuration.
stats <slot/port>
Displays the physical port statistics.
status <slot/port>
Displays the physical port status.
trusted
Displays the trusted ports.
tunneled-node
Displays the tunneled node ports.
untrusted-vlan <slot/port>
Show if there are untrusted vlan entries for the indicated slot and
port.
xsec
Displays the xsec ports.
rap-bw-resv
ap-name
Displays the remote AP uplink BW reservation statistics of the RAP
only.