Users Guide

Parameter Description
ap-name <ap-name>
Name of the AP.
counters
IP reassembly counters.
ip-addr <ip-address>
IP address of the AP
ipv4
Displays the IPv4 contents of the IP Reassembly statistics table.
ipv6
Displays the IPv6 contents of the IP Reassembly statistics table.
ipv6-mcast
Displays the datapath IP multicast table statistics.
destination
Displays the IPv6 tunnel and port membership.
group
Displays the IPv6 multicast group.
station
Displays the IPv6 station membership.
lag table
Displays contents of the datapath link aggregation group (LAG) or
port channel table.
message-queue counters
Displays statistics of messages received by a CPU from other
datapath CPUs (only CPUs that receive messages and non-zero
statistics are shown).
maintenance counters
Displays datapath maintenance statistics.
mobility
Displays datapath IP mobility information.
discovery-table
Displays the discovery count table that is used to keep track of per
client home agent discovery.
home-agent-table
Displays the datapath HA table information.
mcast-table
Displays the mobility multicast-group table that is used to flood the
multicast RA traffic to the roamed clients.
stats
Displays the statistics of the datapath mobility.
nat
Displays the contents of the datapath NAT entries table. It displays
NAT pools as configured in the datapath. Statistics include pool, SITP
start, SIP end and DIP.
network ingress
Displays ingress queue counters.
ap-name <ap-name>
Name of AP.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show datapath | 1428