Users Guide

vlan-mcast
web-cc [counters]
wifi-reassembly counters
wmm counters
Descriptions
Displays system statistics for your controller.
Syntax
Parameter Description
acl id <id-name>
Displays datapath statistics associated with a specified ACL. The
ACL index is found in the show rights command.
amsdu tx
Shows datapath AMSDU TX queue statistics
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of the AP
application counters
Shows application counters and errors generated by applications
running on a particular AP. These include stateful firewall
application layer statistics.
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of the AP.
bridge
Shows bridge table entry statistics including MAC address, VLAN,
assigned VLAN, Destination and flag information for an AP.
ap-name <ap-name>
Name of the AP. Shows MAC address, VLAN, assigned VLANs,
destination and flags information.
counters
Shows datapath bridge table statistics such as current entries, high
water mark, maximum entries, total entries, allocation failures and
max link length.
ip-addr <ip-address>
IP address of the AP. Shows MAC address, VLAN, assigned VLANs,
destination and flags information.
table <macaddr>
Displays the current high, maximum, and total number of bridge
table entries for the Dell controller.
verbose
Displays datapath bridge details in a tabular format.
bwm
Displays the following bandwidth management table entry statistics:
l Type: Indicates whether the contract is a control plane denial-of-
service contract (0), a contract configured through the bandwidth
management WebUI or CLI Interfaces (1), or a contract for
Dell Networking W-Series ArubaOS 6.4.x | User Guide show datapath | 1424