Users Guide

1409 | show crypto-local isakmp Dell Networking W-Series ArubaOS 6.4.x| User Guide
show crypto-local isakmp
show crypto-local isakmp
ca-certificate
certificate-group
disable-aggressive-mode
dpd
key
server-certificate
xauth
Descriptions
This command displays Internet Key Exchange (IKE) parameters for the Internet Security Association and Key
Management Protocol (ISAKMP).
Syntax
Parameter Description
ca-certificate
Shows all the Certificate Authority (CA) certificate associated with VPN
clients.
certificate-group
Shows the existing certificate groups by server certificate name and CA
certificate.
disable-aggressive-mode
Shows if aggressive-mode is enabled or disabled.
dpd
Shows the IKE Dead Peer Detection (DPD) configuration on the local
controller.
key
Shows the IKE preshared key on the local controller for site-to-site VPN.
This is includes keys configured by Fully Qualified Domain Name (FQDN)
and local and global keys configured by address.
server-certificate
Shows all the IKE server certificates used to authenticate the controller
for VPN clients.
xauth
Shows the IKE XAuth configuration for VPN clients.
Usage Guidelines
Use the show crypto-local isakmp command to view IKE parameters.
Examples
This example shows sample output for the show crypto-local ca-certificate, show crypto-local dpd, show
crypto-local key, show crypto-local server-certificate and show crypto-local xauth commands:
(host) #show crypto-local isakmp ca-certificate
ISAKMP CA Certificates
-----------------------
CA certificate name Client-VPN # of Site-Site-Maps
------------------- ---------- -------------------