Users Guide

The output of this command includes the following parameters:
Column Description
Client(IP)
Displays the IP address of the Lync client.
Client(MAC)
Displays the MAC address of the Lync client.
Client Name
Displays the user name of the Lync client.
Registration State
Displays the following registration state of the Lync client with Lync server:
l UNKNOWN: The Lync client is connected to the controller. The client is yet to
initiate any Lync voice, video, desktop sharing, or file transfer session.
l REGISTERED: The Lync client is in registered state once it makes or receives a
voice, video, desktop sharing, or file transfer session.
Call Status
Displays if the Lync client is in any of the following call status:
l Idle
l In-Call
BSSID
Displays the BSSID of the AP to which the Lync client is connected.
ESSID
Displays the SSID of the wireless network to which the Lync client is connected.
AP Name
Displays the name of the access point to which the Lync client is connected.
Flags
Displays any flag for a Lync client. The list of flag abbreviations is also included as part
of this command.
Command History
Version Description
ArubaOS 6.3 Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms This command requires the
PEFNG license
Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.4.x | User Guide show app lync client-status | 1354