Users Guide

show ap spectrum local-override
show ap spectrum local-override
Description
This command shows a list of AP radios currently converted to spectrum monitors via the spectrum local-
override list
Syntax
No parameters
Examples
The output of this example shows that three APs each have two radios defined as spectrum monitors.
(host) #show ap spectrum local-override
Spectrum Local Override Profile
-------------------------------
Parameter Value
--------- -----
Override Entry AP ap125 band 2ghz
Override Entry AP ap125 band 5ghz
Override Entry AP ap105 band 2ghz
Override Entry AP ap105 band 5ghz
Override Entry AP apcorp1 band 2ghz
Override Entry AP APcorp1 band 5ghz
The Value column in the output of this command includes the following information:
Parameter Description
Override Entry Indicates that an AP radio has been added to the local override list
Value Radio that has been added to the override list, and the band used by that
radio.
Related Commands
Command Description Mode
ap spectrum local-override
Convert an AP or AM into a
spectrum monitor by
adding it to the spectrum
local-override list.
Config mode on
master or local
controllers
rf dot11a-radio-profilemode spectrum-mode
Set a 802.11a radio so the
device operates as an
spectrum monitor, and can
send spectrum analysis
data to a desktop or laptop
client.
Config mode on
master or local
controllers
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap spectrum local-override | 1314