Users Guide

1281 | show ap spectrum client-list Dell Networking W-Series ArubaOS 6.4.x| User Guide
show ap spectrum client-list
show ap spectrum client-list {ap-name <ap-name>}|{ip-addr <ip-addr>}
|{ip6-addr <ip6-addr>}
ap-bssid <bssid>
channel <channel>
essid <essid>
mac <mac-addr>
or
page <page>
freq-band 2.4ghz|5ghz
Description
This command shows details for clients seen by a specified spectrum monitor.
Syntax
Parameter Description
ap-name <ap-name>
Name of the spectrum monitor for which you want to view spectrum
information.
ip-addr <ip-addr>
IP address of the spectrum monitor for which you want to view spectrum
information.
ip6-addr <ip6-addr> IPv6 address of the spectrum monitor for which you want to view spectrum
information.
ap-bssid <bssid>
View information for a client with a specific BSSID.
channel <channel>
view information for clients on a specific radio channel.
essid <essid>
View information for clients using a specific ESSID.
mac <mac-addr>
View information for a client with a specific MAC address.
or
Use this parameter to display information that meets either or two criteria,
such as a specified ESSID or channel.
page <number>
Enter a number from 10-100 (inclusive) to specify the number of entries
that should appear in each page of the output for this command. For
example, if the output of this command has 100 entries and you select a
page value of 20, the output will appear in 5 pages each with 20 entries. If
you selected a page value of 10, the output would appear in 10 pages with
10 entries.
freq-band 2.4ghz|5ghz
View information for a specific radio type, either 2.4 GHz or 5 GHz.
Usage Guidelines
Use this command to view channel and signal information for wireless clients seen by the spectrum monitor.