Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsW-Series Controller AOS
1241124212431244124512461247124812491250
1241 | show ap provisioning Dell Networking W-Series ArubaOS 6.4.x| User Guide
Release Modification
ArubaOS 5.0 The mesh-sae parameter no longer displays the sae-default setting if the
parameter is disabled. Only the sae-disable option indicates that this
parameter is currently in its default disabled state.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on the
controller where the AP is terminating.