Users Guide

123 | aaa rfc-3576-server Dell Networking W-Series ArubaOS 6.4.x| User Guide
aaa rfc-3576-server
aaa rfc-3576-server <ipaddr>
clone <source>
key <psk>
no ...
Description
This command configures a RADIUS server that can send user disconnect, session timeout, and change-of-
authorization (CoA) messages, as described in RFC 3576, “Dynamic Authorization Extensions to Remote Dial In
User Service (RADIUS)”.
Syntax
Parameter Description
<ipaddr>
IP address of the server.
clone <source>
Name of an existing RFC 3576 server configuration from which parameter
values are copied.
key <psk>
Shared secret to authenticate communication between the RADIUS client and
server.
no
Negates any configured parameter.
Usage Guidelines
The disconnect, session timeout and change-of-authorization messages sent from the server to the controller
contains information to identify the user for which the message is sent. The controller supports the following
attributes for identifying the users who authenticate with a RFC 3576 server:
l user-name: Name of the user to be authenticated
l framed-ip-address: User’s IP address
l calling-station-id: Phone number of a station that originated a call
l accounting-session-id: Unique accounting ID for the user session.
If the authentication server sends both supported and unsupported attributes to the controller, the unknown
or unsupported attributes will be ignored. If no matching user is found the controller will send a 503: Session
Not Found error message back to the RFC 3576 server.
Example
The following command configures an RFC 3576 server:
aaa rfc-3576-server 10.1.1.245
clone default
key P@$$w0rD;