Users Guide

ManualsBrandsDell ManualsAccess PlatformsW-Series Controller AOS

1211

1215 | show ap monitor Dell Networking W-Series ArubaOS 6.4.x| User Guide

Parameter Description

recognized the client.

l it: Client Idle time, expressed as a number of timer ticks.

routers

Show Router MAC Addresses learned. The output of this command includes

the router’s MAC address, IP address and uptime.

wired-mac

Show Wired MAC Addresses learned.

ap-name <ap-name>

Show data for an AP with a specific name.

bssid <bssid>

Show data for a specific Basic Service Set Identifier (BSSID) on an AP. The

Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.

ip-addr <ip-addr>

Show data for an AP with a specific IP address by entering its IP address in

dotted-decimal format.

ap-bssid <ap-bssid>

Include the optional ap-bssid <ap-bssid> parameters to show how the AP is

monitoring information for another AP with a specific BSSID.

enet-mac <enet-mac>

Include the optional enet-mac <enet-mac> parameters to show how the AP

is monitoring information for an interface with a specific Ethernet MAC

address.

Examples

The output of the command displays the Monitored AP table, which lists all the APs monitored by a specified

AP or BSSID.

(host) #show ap monitor ap-list ap-name al12

Monitored AP Table

------------------

bssid essid chan ap-type phy-type dos

----- ----- ---- ------- -------- ---

d8:c7:c8:3d:41:20 test-apprf 1 suspected-rogue(20%) 80211b/g-HT-20 disable

6c:f3:7f:8e:6a:b1 esx12_1x 1 interfering 80211b/g-HT-20 disable

18:64:72:93:6a:63 test_cp 1 interfering 80211b/g-HT-20 disable

d8:c7:c8:3d:46:72 135-hierarchy-psk 36 suspected-rogue(20%) 80211a-HT-40 disable

6c:f3:7f:43:d4:2a sw-inst 40 interfering 80211a-HT-40 disable

dt/mt ut/it encr nstas avg-rssi curr-rssi wmacs ibss

----- ----- ---- ----- -------- --------- ----- ----

22053/21183 1/0 wpa2-psk-aes 0 50 47 0 no

22053/21183 1/0 wpa2-8021x-aes 0 17 17 0 no

22053/16068 1/0 wpa2-psk-aes 0 60 61 0 no

21976/2165 34/0 wpa2-psk-aes 0 52 54 1 no

21404/2668 0/0 wpa2-psk-aes 0 50 50 0 no

Start:0

Length:5

Total:5

The output of this command includes the following information: