Users Guide

show ap mesh topology
show ap mesh topology [long] [page <page>] [start <start>]
Description
Show the mesh topology tree.
Syntax
Parameter Description
long
Include the names of a mesh portal’s children in the output of this command
page <page>
Limit the output of this command to a specific number of entries by entering
the number of entries you want to display.
start <start>
Start displaying the mesh topology tree at a chosen index number by entering
the index number of the AP at which command output should start.
Example
An (N) in the Mesh Role column indicates the node is 11N capable. An (N) beside the parent name in the
Parent column indicates that the mesh node’s the parent is also 11N capable.
(host) #show ap mesh topology
Mesh Cluster Name: sw-ad-GB32
-----------------------------
Name Mesh Role Parent Path Cost Node Cost Link Cost Hop Count RSSI Rate Tx/Rx
---- --------- ------ --------- --------- --------- --------- ---- ---------- Last
Update Uplink Age #Children
---------- ---------- ---------
ad-ap Point (N) mp3 2 0 0 1 61 300/270 6m:12s
3h:8m:7s 0
msc-1 Point mp3 2 0 0 1 64 54/54 6m:36s
2h:48m:12s 0
Total APs :2
(R): Recovery AP. (N): 11N Enabled. For Portals 'Uplink Age' equals uptime.
The output of this command includes the following information:
Column Description
Name
Name of the mesh node.
Mesh Role
An AP operating as a mesh node can have one of two roles: mesh portal or
mesh point.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap mesh topology | 1210