Users Guide

Parameter Description Default
WARNING: Increasing the max-ip limit may
prevent the system from scaling to
maximum users on all master/local
controllers. For more information, refer to
Usage Guidelines for max-ip ipv4 wireless
on page 118.
multiple-server-accounting
If enabled, the controller sends RADIUS
accounting to all servers in RADIUS
accounting server group.
disabled
no
Negates any configured parameter. —
pan-integration
The profile requires mapping at a Palo Alto
Networks (PAN) firewall
disabled
radius-accounting <group>
Name of the server group used for RADIUS
accounting. See aaa server-group on page
125.
—
radius-interim-accounting
By default, the RADIUS accounting feature
sends only start and stop messages to the
RADIUS accounting server. Issue the
interim-radius-accounting command to
allow the controller to send Interim-Update
messages with current user statistics to the
server at regular intervals.
disabled
rfc-3576-server <ip-addr>
IP address of a RADIUS server that can
send user disconnect, session timeout and
change-of-authorization messages, as
described in RFC 3576, “Dynamic
Authorization Extensions to Remote Dial In
User Service (RADIUS)”. See aaa rfc-3576-
server on page 123.
NOTE: This parameter requires the PEFNG
license.
—
sip-authentication-role <role>
Configured role assigned to a session
initiation protocol (SIP) client upon
registration.
NOTE: This parameter requires the PEFNG
license.
guest
user-derivation-rules <profile>
User attribute profile from which the user
role or VLAN is derived.
—
Dell Networking W-Series ArubaOS 6.4.x | User Guide aaa profile | 116