Users Guide

Parameter Description
Tx Mgmt Bytes
Total management frame bytes transmitted.
Tx Beacons Bytes
Total number of Beacon frame bytes transmitted.
Tx Data Frames Dropped
Number of transmitted data frames that were dropped.
Tx AMSDU pkt count
Total number of AMSDU bytes transmitted.
Rx Last SNR
The last recorded signal-to-noise ratio.
Rx Last SNR CTL0
The signal-to-noise ratio for the last received data packet on the
primary (control) channel 0. This parameter is only displayed for
APs operating in 40 Mhz mode.
Rx Last SNR CTL1
The signal-to-noise ratio for the last received data packet on the
secondary (control) channel 1. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last SNR CTL2
The signal-to-noise ratio for the last received data packet on the
secondary (control) channel 2. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last SNR EXT0
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 0. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last SNR EXT1
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 1. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last SNR EXT2
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 2. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last ACK SNR EXT0
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 0. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last ACK SNR EXT1
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 1. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Last ACK SNR EXT2
Signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 2. This parameter is only displayed
for APs operating in 40 Mhz mode.
Rx Frames Received
Number of frames received.
Rx Good Frames
Number of frames received with no errors.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap debug radio-stats | 1126