Users Guide

1037 | show ap config Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
Max Tx Power
Maximum transmission
power for this AP, in dBm.
Min Tx Power
Minimum transmission
power for this AP, in dBm.
Multi Band Scan
Shows if the multi-band
scan feature has been
enabled or disabled on
this AP. If enabled, single-
radio APs will try to scan
across bands for Rogue
AP detection
Rogue AP Aware
Shows if the rogue AP
awareness feature has
been enabled or disabled
on this AP. If enabled, the
AP will try to contain off-
channel Rogue APs
Scan Interval
This column indicates, in
seconds, how often the AP
will leave its current
channel to scan other
channels in the band if
scanning is enabled
Active Scan
Displays whether or not
the active scan feature is
enabled.
NOTE: This option elicits
more information from
nearby APs, but also
creates additional
management traffic on the
network. Active Scan is
disabled by default, and
should not be enabled
except under the direct
supervision of Dell Support.
Scanning
Shows if scanning is
enabled or disabled for
this AP. If this option is
disabled, the following
other options will also be
disabled:
l Multi Band Scan
l Rogue AP Aware
l Voip Aware Scan
l Power Save Scan