Users Guide

Parameter Description
l Disable mode: This
mode does not support
the tuning of the CCA
Detect Threshold.
Rx sensitivity threshold
RX Sensitivity Tuning
Based Channel Reuse
Threshold, in -dBm.
If the Rx Sensitivity Tuning
Based Channel reuse
feature is set to static
mode, this parameter
manually sets the AP’s Rx
sensitivity threshold (in -
dBm). The AP will filter out
and ignore weak signals
that are below the channel
threshold signal strength.
If the value is set to zero,
the feature will
automatically determine
an appropriate threshold
Non 802.11a interference Immunity
The value for 802.11
Interference Immunity.
This parameter sets the
interference immunity on
the 2.4 Ghz band.
The default setting for this
parameter is level 2.
When performance drops
due to interference from
non-802.11 interferers
(such as DECT or
Bluetooth devices), the
level can be increased up
to level 5 for improved
performance. However,
increasing the level makes
the AP slightly “deaf” to its
surroundings, causing the
AP to lose a small amount
of range.
The levels for this
parameter are:
l Level-0: no ANI
adaptation.
l Level-1: noise
immunity only.
l Level-2: noise and spur
immunity. This is the
default setting
l Level-3: level 2 and
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap config | 1034