Users Guide

1033 | show ap config Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
and a spectrum load
balancing domain
isalso defined, AP
radios belonging to the
same spectrum load
balancing domain will
be considered part of
the same RF
neighborhood for load
balancing, and will not
recognize RF
neighborhoods defined
by the ARM feature.
Rx sensitivity tuning based channel reuse
The channel reuse feature
can operate in either of
the following three modes;
static, dynamic or disable.
(This feature is disabled
by default.)
l Static mode: This
mode of operation is a
coverage-based
adaptation of the Clear
Channel Assessment
(CCA) thresholds. In
the static mode of
operation, the CCA is
adjusted according to
the configured
transmission power
level on the AP, so as
the AP transmit power
decreases as the CCA
threshold increases,
and vice versa.
l Dynamic mode: In
this mode, the Clear
Channel Assessment
(CCA) thresholds are
based on channel
loads, and take into
account the location of
the associated clients.
When you set the
Channel Reuse This
feature is
automatically enabled
when the wireless
medium around the AP
is busy greater than
half the time. When
this mode is enabled,
the CCA threshold
adjusts to
accommodate
transmissions between
the AP its most distant
associated client.