Users Guide

1015 | show ap bss-table Dell Networking W-Series ArubaOS 6.4.x| User Guide
(host) #show ap bss-table
fm (forward mode): T-Tunnel, S-Split, D-Decrypt Tunnel, B-Bridge (s-standard, p-persistent, b-
backup, a-always), n-anyspot
Aruba AP BSS Table
------------------
bss ess port ip phy type ch/EIRP/max-EIRP cur-cl ap
name in-t(s) tot-t mtu acl-state acl fm
--- --- ---- -- --- ---- ---------------- ------ ---
---- ------- ----- --- --------- --- --
9c:1c:12:fd:ec:e0 qa_testing N/A 172.16.10.20 g-HT ap 6/19/19 0 204
0 27d:21h:54m:23s 1578 - 58 T
9c:1c:12:fd:ec:e1 qa_testing1 N/A 172.16.10.20 g-HT ap 6/19/19 0 204
0 27d:21h:54m:23s 1578 - 58 Tn
9c:1c:12:fd:ec:f0 qa_testing N/A 172.16.10.20 a-VHT ap 36/10/20 2 204
0 27d:21h:54m:23s 1578 - 58 T
9c:1c:12:fd:ec:f1 qa_testing1 N/A 172.16.10.20 a-VHT ap 36/10/20 0 204
0 27d:21h:54m:23s 1578 - 58 Tn
Channel followed by "*" indicates channel selected due to unsupported configured channel.
"Spectrum" followed by "^" indicates Local Spectrum Override in effect.
Num APs:4
Num Associations:2
The output of this command includes the following information:
Column Description
bss
The AP Basic Service Set Identifier (BSSID). This is usually the MAC address of the
AP
ess
The AP Extended Service Set Identifier (ESSID).
s/p
ip
IP address of an AP.
phy
An AP radio type. Possible values are:
l a—802.11a
l a-HT—802.11a high throughput
l g— 802.11g
l g-HT—802.11g high throughput
type
Shows whether the AP is working as an access point (AP) or air monitor (AM).
ch/EIRP/max-EIRP
Radio channel used by the AP/current effective Isotropic Radiated Power (EIRP)
/maximum EIRP.
cur-cl
Current number of clients on the AP.
ap name
Name of the AP.