Users Guide

10 | The ArubaOS Command-Line Interface Dell Networking W-Series ArubaOS 6.4.x| User Guide
Command Description
show whitelist-db cpsec-
status
The Whitelist-sync is enabled parameter is introduced as part of
the command output.
tunnel-group The tunnel ID limit is changed from 2147483647 to 16777215.
voice real-time-config The default value is changed to enabled.
vrrp The holdtime parameter is introduced.
whitelist-db cpsec add The ap-group and ap-name parameters are introduced.
whitelist-db cpsec modify The ap-group and ap-name parameters are introduced.
wlan virtual-ap The wan-operation parameter is introduced.
Commands in ArubaOS 6.4.2.5
Modified Commands
The following commands are modified in ArubaOS 6.4.2.5:
Command Description
aaa authentication-server
radius
The cppm parameter is introduced.
firewall The optimize-dad-frames parameter is introduced.
show aaa authentication-
server radius
The CPPM credentials parameter is introduced.
show firewall The Optimize Duplicate Address Detection frames parameter is
introduced.
show running-config The default dot1x high-watermark and dot1x low-watermark
values were removed from the show running-config command.
show web-server The Enable bypass captive portal landing page parameter is
introduced.
tar The show dot1x watermark history is added as part of the
techsupport.log file.
web-server profile The bypass-cp-landing-page parameter is introduced.