Users Guide

925| Voice and Video Dell Networking W-Series ArubaOS 6.5.x| User Guide
a. Navigate to Configuration > Network > IP. Under the IGMP settings, select the Enable IGMP check
box.
b. Select the Snooping check box.
c. Click Apply.
2. Enable wireless multimedia and set a DSCP value for video traffic:
a. Navigate to Configuration > Advanced Services > All Profiles.
b. Under the Profiles column, expand Wireless LAN > SSID Profile and select the profile name.
This example uses the default profile.
c. Click the Advanced tab and select the Wireless Multimedia (WMM) check box.
d. Enter the DSCP value (integer number) in the DSCP mapping for WMM video AC field.
e. Click Apply.
3. Create an ACL on the controller with the values equivalent to the DSCP mappings to prioritize the video
traffic:
a. Navigate to Configuration > Security > Access Control and click the Policies tab.
b. Click Add to create a new policy.
c. Enter the appropriate values under Rules to match the DSCP mapping values.
You can also add this ACL to any user role or port.
To apply the ACL to a user role:
a. Navigate to Configuration > Security > Access Control page and click the User Roles tab.
b. Edit the user role and click Add under Firewall Policies.
c. Select the ACL from the Choose From Configured Policies drop-down menu and click the Done
button.
d. Click Apply to save the configurations.
To apply the ACL to a port:
a. Navigate to Configuration > Network > Port and select the upstream port.
b. Under the Firewall Policy drop-down menu, select the ACL.
c. Click Apply.
4. Configure dynamic multicast optimization for video traffic on a virtual AP profile:
Under the Profiles column, expand Wireless LAN > Virtual AP Profile and select the profile name. This
example uses the default profile. In the Profile Details section, select the Dynamic Multicast
Optimization (DMO) option and enter the threshold value.
5. Configure multicast rate optimization for the video traffic:
a. Navigate to Configuration > Advanced Services > All Profiles.
b. Under the Profiles column, expand Wireless LAN > SSID Profile and select the profile name.
c. Click the Advanced tab and select the BC/MC Rate Optimization check box.
d. Select an option from the Video Multicast Rate Optimization drop-down menu.
e. Click Apply.
Configuring the Video Multicast Rate Optimization parameter overrides the configuration of BC/MC Rate
Optimization parameter for VI-tagged multicast traffic. Multicast traffic that is not VI-tagged behaves the same with
BC/MC as before. If multicast rate is not set, all traffic behaves the same.
6. Configure ARM scanning for video traffic:
Under the Profiles column, expand RF Management > Adaptive Radio Management (ARM) Profile
and select the profile name. This example uses the default profile. Select the Video Aware Scan option and