Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsW-Series Controller AOS
881882883884885886887888889890
Table Of Contents
Parameter Description
Advertise Hotspot
2.0 Capability
This checkbox enables or disables the hotspot. When this feature is enabled,
the Information Elements (IEs) for this hotspot are included in beacons and
probe responses from the AP.
This setting is disabled by default.
Use GAS Comeback
Request/Response
By default, ANQP Information is obtained from a GAS Request and Response.
If you enable the Use GAS Comeback Request/Response option,
advertisement information is obtained using a GAS Request and Response. as
well as a Comeback-Request and Comeback-Response. This option is disabled
by default.
Additional Steps
required for Access
Enabled
Select this checkbox if any additional steps are required for network access. If
this parameter is enabled, the AP will send the following Information Elements
(IEs) in response to the client’s the ANQP query.
l Venue Name
l Domain Name List
l Network Authentication Type
l Roaming Consortium List
l NAI Realm List
NOTE: If this parameter is enabled, the advertisement profile for this hotspot
must reference an enabled network authentication type profile.
Network Internet
Access
If you select this checkbox, the AP sends an Information Element (IE) indicating
that the network allows internet access. By default, a hotspot profile does not
advertise network internet access.
Length of Query
Response
Generic Advertisement Service (GAS) enables advertisement services that
lets clients query multiple 802.11 networks at once, while also allowing the
client to learn more about a network’s 802.11 infrastructure before
associating.
If a client transmits a GAS Query using a GAS Initial Request frame, the
responding AP will provide the query response (or information on how to
receive the query response) in a GAS Initial Response frame.
This parameter sets the maximum length of the GAS query response, in
octets. The supported range is 1-255 octets.
Access Network Type
Specify the 802.11u network type. The default setting is public-chargeable.
l emergency-services: emergency services only network
l personal-device: personal device network
l private: private network
l private-guest: private network with guest access
l public-chargeable: public chargeable network
l public-free: free public network
l test: test network
Table 198: Hotspot 2.0 Profile Settings
Dell Networking W-Series ArubaOS 6.5.x | User Guide 802.11u Hotspots |
887