Users Guide

Figure 96 Profile Details
In the CLI
Execute the following command to enable the secondary master controller feature.
(host) (config) #ap system-profile <profile name>
(host) (AP system profile "profile name")#secondary-master <value>
Deploying a Branch/Home Office Solution
In a branch office, the AP is deployed in a separate IP network from the corporate network. Typically, there are
one or two NAT devices between the two networks. Branch office users need access to corporate resources
such as printers and servers, but traffic to and from these resources must not impact the corporate head
office.
Figure 97 is a graphic representation of a remote AP in a branch or home office, with a single controller
providing access to both a corporate WLAN and a branch office WLAN.
Dell Networking W-Series ArubaOS 6.5.x | User Guide Remote Access Points | 686