Users Guide

and role information correspond with each other. For more details and examples on the show spantree
command, refer to show spantree in the ArubaOS Command-Line Interface Reference Guide.
l The show spanning-tree interface command (config-if mode) displays Tx/Rx BPDU counters. For
example, if a port’s role is “designated,” it only transmit BPDUs but does not receive any. In this case, the Tx
counter continues to increase in increments while the Rx counter remains the same. This is reversed when a
port's role is “root/alternate/backup”. For more details and examples on the show spanning-tree
interface command, refer to show spaning-tree in the ArubaOS Command-Line Interface Reference
Guide.
Dell Networking W-Series ArubaOS 6.5.x | User Guide RSTP |
638